Indoor Siren (Art. no. SG1250)

  • LED to display armed/disarmed status
  • Simple, inconspicuous design
  • Selectable volume
  • Low power consumption
  • Impact-resistant housing monitored for tampering
  • Sound pressure: 90 dB (A) – low, 110 dB (A) – high
  • Protection class: IP54

Indoor Siren (Art. no. SG1250)

For trouble-free and safe operation, this device must be installed and regularly maintained by a specialist trained by us. Arrange regular maintenance appointments with your installer to ensure trouble-free operation over the long term with the latest safety updates and new functions

The inside siren is installed inside your building. It is the last and critical module of a complete alarm chain. The inside siren is an acoustic signal generator. You have a choice between two alarm modes in this case: A 110 dB alarm and a 90 dB acknowledgement tone. Both signals are felt to be extremely loud due to the high acoustic pressure and the signal frequency. The remotely activated LED of the alarm siren can be used to detect the status of the alarm panel (armed/disarmed). The rugged plastic housing (IP 54) of the acoustic signal generator is protected against sabotage by a wall and cover contact. The inside siren is powered with 12 V.

Art. no.: SG1250
Dimensions: (WxHxD) 100x155x48 mm
Width: 100 mm
Housing material: ABS
Height: 155 mm
Length: 48 mm
Power consumption: 3,6 W
Illuminant: LED
Max. battery life: 50 year(s)
Min. operating temperature: -10 °C
Installation location: Indoors
Tamper monitoring:
Sound pressure: 90/110 dB
IP protection class: 54
DC voltage supply: 12 V
Power consumption: 300 mA

Scope of delivery:

  • 1x Indoor siren

General Downloads:

Questions & answers

FAQ
Security glossary