Duplex VdS Motion Detector (Art. no. BW8020)

  • Passive infrared motion detector for indoor areas
  • Detects heat movements
  • Two logical AND-gated PIR sensors

Duplex VdS Motion Detector (Art. no. BW8020)

We expressly recommend having this product installed by a certified specialist.

The Xevox Duplex VdS motion detector sensor is a passive infrared motion sensor (PIR motion sensor) with two PIR sensors. It reacts to all types of heat movement and reports this to the alarm center. The two PIR elements ensure a high level of protection against false alarms. The reason: An alarm is not triggered until both sensors register movement. The best place to install the sensor is in a corner, between 2 and 3 metres above the floor. The intruder's possible direction of movement should be at right-angles to the sensor. Do not install the motion sensor near to electric cables, gas lines, or electronic equipment that generate heat during long periods of operation. The viewing angle of the Xevox Duplex VdS motion detector sensor is 90 degrees, and the detection range – depending on installation height – up to 15 x 15 meters. You can vary its sensitivity by means of a jumper. In this way, you can define the number of pulses that have to be detected before the sensor opens the alarm relay. The Xevox Duplex VdS motion detector sensor has an alarm memory. If the alarm center is disarmed following an alarm, the LED on the sensor that triggered the alarm lights up. Depending on the configuration, you can also see which sensor first triggered the alarm. On this sensor, the LED flashes. Due to its reliability and high quality, the Xevox Duplex VdS motion detector sensor is VdS-certified.

Art. no.: BW8020
Dimensions: (WxHxD) 60x107x48 mm
Alarm memory:
Connections: NC, 50 mA, 24 V DC
Display:
Width: 60 mm
Type of detection: Heat detection
Adjustable sensitivity:
Detection range of detector (m): 15 m
Housing material: ABS
Height: 107 mm
Pulse selector:
Length: 48 mm
Power consumption: 0,099 W
Max. operating temperature: 55 °C
Installation location: Wall
Net weight: 0,09 kg
Tamper monitoring:
Sensor type: 2xdual PIR
DC voltage supply: 9-16 V
Status display:
Power consumption: 11 mA
Creep zone:
White light filter:
Certifications: VdS, VSÖ, REQ

Scope of delivery:

  • 1x Duplex VdS Motion Detector

Product recommendations

Questions & answers

FAQ
Security glossary