Wired Motion Detector (Art. no. BW8000)

  • Passive infrared sensor
  • High HF interference immunity
  • Look-down lens protection
  • Only 9mA power consumption

Wired Motion Detector (Art. no. BW8000)

We expressly recommend having this product installed by a certified specialist.

The Xevox Eco motion detector is a passive infrared motion sensor (PIR sensor). It reacts to all types of heat movement and reports this to the alarm center. The best place to install the equipment is in a corner, between 2 and 3 meters above the floor. The potential motion direction should be at right-angles to the sensor. Unsuitable for installation are all places opposite to sources of heat (e.g.: heating) or a window. Do not install the motion sensor near electric cables, gas lines, or electronic equipment that generates heat during long periods of operation. The viewing angle of the Xevox Eco motion detector sensor is 90 degrees, and the detection range - depending on installation height - up to 15 x 15 meters. You can vary the sensitivity of the sensor with a jumper. This way you can define the number of pulses that have to be detected before the sensor opens the alarm relay.

Art. no.: BW8000
Dimensions: (WxHxD) 60x106x47 mm
Connections: NC, 100 mA, 24 V DC
Display:
Width: 60 mm
Type of detection: Heat detection
Adjustable sensitivity:
Detection range of detector (m): 15 m
Housing material: ABS
Height: 106 mm
Pulse selector:
Length: 47 mm
Power consumption: 0,081 W
Max. operating temperature: 55 °C
Installation location: Wall
Net weight: 0,08 kg
Tamper monitoring:
Sensor type: Dual PIR
DC voltage supply: 9-12 V
Status display:
Power consumption: 9 mA
Creep zone:
White light filter:

Scope of delivery:

  • 1x Wired Motion Detector

General Downloads:

Product recommendations

Questions & answers

FAQ
Security glossary