12 V Differential Heat Detector (Art. no. RM1100)

  • Suitable for connecting to alarm and fire detection systems
  • Detects temperature changes
  • Usable in steamy rooms
  • Potential-free alarm relay

12 V Differential Heat Detector (Art. no. RM1100)

We expressly recommend having this product installed by a certified specialist.

The 12 V thermo-differential detector detects incipient fires. It reacts to a maximum temperature and a sudden rise in temperature. These indicators are reliably detected and reported to the alarm center. The 12 V thermo-differential detector is mounted on the ceiling in the center of the room. The minimum distance to the side wall should be 30 cm. Since the heat detector does not detect smoke (as opposed to optical smoke detectors), it is used mainly in places with high dust and smoke pollution (kitchens, smoke rooms, garages). The detector triggers an alarm when the maximum temperature of 57° C is exceeded or when the temperature rises more than 5° C within 3 minutes. By changing a jumper, you can configure it as NO or as NC detector. It is therefore suitable for every wired alarm system. The 12 V raise of heat detector is supplied externally with 10 –15V operating voltage and is EN54 certified.

Art. no.: RM1100
Dimensions: (HxD) 46x100 mm
Connections: Screw terminal NO or NC, 1A at 30V DC
Width: 100 mm
Type of detection: Thermal
Housing material: ABS
Height: 46 mm
Power consumption: 0,5 W
Max. operating temperature: 50 °C
Max. humidity: 95 %
Min. operating temperature: -10 °C
Installation location: Ceiling
Net weight: 0,142 kg
DC voltage supply: 12 V
Power consumption: 50 mA
Certifications: EN 54-5

Scope of delivery:

  • 1x 12 V Differential Heat Detector
  • 1x User manual

General Downloads:

Additional Information:

Smoke alarm devices

A fire breaks out somewhere in Europe every minute, costing lives. The best protection against invisible smoke gases: wired smoke detectors in conjunction with a Terxon alarm panel. This vigilant team immediately informs you about the fire danger and sends a signal directly to security services via the primary control unit. This way you can protect material assets and save lives. ...
Other interesting products from the category Smoke alarm devices

Questions & answers

Security glossary