
Content
We expressly recommend having this product installed by a certified specialist.
The Terxon MX 8-zone Wired Extension is an extension module for the Terxon MX. Using this module, you can extend your alarm system by up to 8 wired alarm zones. The 8 zones of the wired expansion are connected to the motherboard of the Terxon MX via 4-wire bus cables. You can connect up to 3 expansion modules (wireless or wired) to your existing alarm center. The Terxon MX can thus be expanded to up to 32 zones. The additional alarm zones are freely programmable and tampering-protected. The type of wiring – NC or DEOL – is left up to you, but it must be the same for all zones. Via a jumper on the circuit board, you can assign the zones of the expansion module (9 to 16, 17 to 24 and 25 to 32).
Art. no.: | AZ4130 |
Dimensions: | (WxHxD) 128x183x35 mm |
Connections: | 4-wire bus |
Number of wired zones: | 8 |
Width: | 128 mm |
Housing material: | ABS |
Height: | 183 mm |
Length: | 35 mm |
Power consumption: | 30 W |
Net weight: | 0,33 kg |
Tamper monitoring: | |
DC voltage supply: | 12 V |
Power consumption: | 30 mA |
Certifications: | REQ |
Subscribe to our newsletter
View ABUS YouTube movies
Partner Areas
Video Surveillance, Alarm Technology & Mechatronics
Key Ordering
Planning Tool Locking Systems