
We expressly recommend having this product installed by a certified specialist.
The Secvest wireless outdoor siren kit consists of a compact sounder and the universal module. You can install the siren kit inside or outside a building. Signal transmission from the universal module to the alarm panel is wireless; the universal module and the siren are connected via cable. Alarming is done by the combination siren. In the event of an alarm, the siren produces an extremely loud sound with more than 116 dB sound acoustic pressure. The alarm duration is 3 minutes. In addition to the acoustic alarm a widely visible alarm is produced by the red Xenon flash light (flash frequency 1 Hz). Siren and flash can be controlled separately. The sturdy, weather-resistant housing made of galvanized steel (IP34) is protected against sabotage by a wall contact tamper switch. An emergency battery pack (1200 mAh) is already integrated in the housing. This backup power supply also triggers an alarm in the event of attempted sabotage, e.g. if cables are manipulated. The compact sounder module is powered by 12 V. The power consumption in standby mode is 50 mA, in the event of an alarm 480 mA.
Art. no.: | FUSG50020 |
Art. no.: | AZZU10030 |
Output voltage DC: | 13,8 V |
Dimensions: | (W x H x D) about 46 x 80 x 38 mm |
Input voltage AC: | 230 V |
Housing material: | ABS (white) |
Cable length: | 1,5 m |
Max. operating temperature: | 40 °C |
Max. humidity: | 90 % |
Min. operating temperature: | 0 °C |
Net weight: | 0,16 kg |
AC voltage supply: | 100 - 240 V |
DC voltage supply: | 13,8 V |
Power consumption: | 1,75 mA |
Art. no.: | FUMO50020 |
VdS class: | none |
Dimensions: | (WxHxD) 122x208x42 mm |
Connections: | 4 x transistor relay (NO/NC), max. switch capacity 500 mA, 24 V DC, R=2 / 1 x RJ12 for control of the siren |
Display: | 10 LEDs |
Battery type: | 6V DC, 1.2Ah |
Width: | 122 mm |
Radio frequency: | 868 MHz |
Transmission power: | 10 mW |
Housing material: | ABS |
Height: | 208 mm |
Length: | 42 mm |
Power consumption: | 0,84 W |
Max. run time on backup power: | 12 h |
Max. receiving range (outdoors): | 100 m |
Max. receiving range (building): | 30 m |
Max. sending range (outdoors): | 100 m |
Max. sending range (building): | 30 m |
Modulation: | FM |
Net weight: | 0,33 kg |
Backup power supply: | Yes |
Tamper monitoring: | Yes |
Voltage monitoring: | Yes |
DC voltage supply: | 12 V |
Power consumption: | 70 mA |
Zone closure: | EOL, CC |
Art. no.: | FU2938 |
VdS class: | none |
Dimensions: | (WxHxD) 315x200x50 mm |
Flashing frequency: | 1 Hz |
Width: | 315 mm |
Housing material: | Steel |
Height: | 200 mm |
Length: | 50 mm |
Power consumption: | 5,16 W |
Luminous color: | Red |
Illuminant: | Xenon |
Max. operating temperature: | 55 °C |
Min. operating temperature: | -25 °C |
Installation location: | Indoors and protected outdoor areas |
Net weight: | 2,45 kg |
Backup power supply: | 1200 mAh rechargeable battery (BT2012) optional |
Tamper monitoring: | Wall/cover contact and cable |
Sound pressure: | 116 dB |
IP protection class: | 34 |
Voltage monitoring: | Yes |
DC voltage supply: | 12 V |
Power consumption: | 430 mA |