Secvest Wireless Control Device (Art. no. FUBE50001)

  • For arming/disarming the alarm panel
  • Integrated proximity chip key reader
  • Switching outputs possible
  • Power supply using batteries and/or external power supply
  • LEDs for displaying the current status
  • Encrypted signal transmission

Secvest Wireless Control Device (Art. no. FUBE50001)

We expressly recommend having this product installed by a certified specialist.

Easy operation via code or proximity keyfob
The Secvest wireless control panel is an optional Secvest accessory. Every wireless control panel can be operated from your system via PIN code. It is possible to arm and disarm the panel via proximity keyfob.
Flexible use in entrance areas
Up to 8 control panels can be integrated into the alarm system. These additional modules can be placed in various areas of the building. This provides added convenience for you, because Secvest can be armed and disarmed directly on the wireless control panel, without the need to go back to the central alarm panel every time.
In addition to internal arming or arming individual sub-areas, you can also switch a single output, such as the garage door, if desired.
Rolling Code
Thanks to the rolling code process this product is protected against so-called replay attacks. All controlling signals between this product and the Secvest alarm panel are in individualised and thus, are not able to be reproduced by third parties. This process is protected from third party tampering, and exceeds the requirements of the “DIN EN 50131-1 level 2” security standard.

Art. no.: FUBE50001
Color: white
Dimensions: (WxHxD) 120x120x30 mm
Battery type: 3 x AA (1,5 V Alkaline)
Width: 120 mm
Gross weight: 0,246 kg
Radio frequency: 868,6625 MHz
Transmission power: 10 mW
Housing material: ABS
Height: 120 mm
Length: 30 mm
Max. battery life: 1 year(s)
Max. operating temperature: 55 °C
Max. humidity: 94 %
Max. receiving range (outdoors): 100 m
Max. receiving range (building): 30 m
Max. sending range (outdoors): 100 m
Max. sending range (building): 30 m
Min. operating temperature: -10 °C
Modulation: FM
Installation location: Indoors
Net weight: 0,176 kg
Tamper monitoring:
Sound pressure: 103,7 dB
IP protection class: 54
Security level: 2
Software version: 2,8
Voltage monitoring:
AC voltage supply: 9-12 V
DC voltage supply: 9-15 V
Status display: 4 Status LEDs for partitions
Power consumption: 100 mA
Environmental class: II
Certifications: VdS

Scope of delivery:

  • 1x Wireless control device
  • 3x AA alkaline battery
  • 1x Installation material
  • 1x Installation instructions and user manual

Security from the experts: you can rely on them

5 steps to your functional alarm system

  1. Send us your query
  2. We find a suitable specialist dealer near you
  3. Security advice on site
  4. Quotation and project planning
  5. Installation, function test and handover log
Mandatory fields are marked with * (asterisk).

Product recommendations

Questions & answers

FAQ
Security glossary