Convenient operation of the alarm control panel
The wireless remote control is a practical accessory for the Secvest wireless alarm system. Its use enables the system to be operated at the simple touch of a button. It also allows the current system status to be queried at any time. The wireless remote control is only compatible with the FUAA50000.
Reliable arming at long range
The remote control facilitates arming and disarming of the alarm system – even at great distances. Thanks to 8 integrated LEDs, real-time feedback is provided regarding changes to the system status. The transmission range is approx. 30 metres.
Rapid assistance in an emergency
Simultaneously pressing the ‘arm’ and ‘disarm’ buttons triggers a panic alarm. This protects both people and valuables effectively.
Display of additional information
By pressing the third button, important information about the status of the alarm control panel can be queried (armed, disarmed, internal protection active, fault). Feedback is immediately displayed on the remote control.
Useful convenience functions
The fourth button allows custom configuration, it can be set to control a garage door, for example. This button can be programmed directly on the alarm control panel.
Thanks to the rolling code process this product is protected against so-called replay attacks. All controlling signals between this product and the Secvest alarm panel are in individualised and thus, are not able to be reproduced by third parties. This process is protected from third party tampering, and exceeds the requirements of the “DIN EN 50131-1 level 2” security standard.