Secvest wireless key switch (Art. no. FUBE50061)

  • Convenient arming and disarming of the alarm panel by turning a key
  • Sturdy housing
  • Cylinder guard
  • Encrypted signal transmission

Secvest wireless key switch (Art. no. FUBE50061)

We expressly recommend having this product installed by a certified specialist.

Never forget your code again
The Secvest wireless key switch is an optional accessory for the Secvest wireless alarm system. It makes convenient arming and disarming of the alarm system possible with just the turn of a key. It is no longer necessary to enter a code on the central alarm panel and the alarm system can be armed and disarmed on the central alarm panel or the control panel by turning the key.
Clear status display – reliable transmission
Two integrated LEDs indicate the system status. The risk of a false alarm caused by an operative fault is therefore mitigated. The alarm panel and its components communicate over a secure wireless frequency exclusively reserved for the security industry. Protection class IP55 allows use of the wireless key switch in protected outdoor areas.
Rolling Code
Thanks to the rolling code process this product is protected against so-called replay attacks. All controlling signals between this product and the Secvest alarm panel are in individualised and thus, are not able to be reproduced by third parties. This process is protected from third party tampering, and exceeds the requirements of the “DIN EN 50131-1 level 2” security standard.

Art. no.: FUBE50061
Dimensions: (WxHxD) 87x117x47 mm
Battery type: 3.6 V AA Li battery (FU2992) or 12 V DC
Width: 87 mm
Radio frequency: 868,6625 MHz
Transmission power: 10 mW
Housing material: Aluminium and plastic
Height: 117 mm
Length: 47 mm
Max. battery life: 2 year(s)
Max. operating temperature: 55 °C
Max. receiving range (outdoors): 100 m
Max. receiving range (building): 30 m
Max. sending range (outdoors): 100 m
Max. sending range (building): 30 m
Min. operating temperature: -10 °C
Installation location: Indoors and protected outdoor areas
Net weight: 0,55 kg
Tamper monitoring:
IP protection class: 55
Voltage monitoring:
DC voltage supply: 3,6/12 V
Status display:
Power consumption: 36 mA
Environmental class: II

Scope of delivery:

  • 1x Secvest Wireless Key Switch
  • 1x Installation material
  • 1x Cylinder
  • 3x Key
  • 1x Battery 3,6 V AA Li-Batterie (FU2992)

Konformitätserklärungen:

Control devices and extensions

The Secvest can be easily operated. It can be armed and disarmed by remote control, button, PIN code, chip key, the turn of a key, or using a mobile phone. The response in the form of a voice announcement, an optical or acoustic signal lets you know the status of the system. ...
Other interesting products from the category Control devices and extensions

Questions & answers

FAQ
Security glossary