ABUS Secvest wireless repeater (FUMO50010)

Secvest wireless repeater (Art. no. FUMO50010)

Accessory to expand the range and amplify the signal strength of Secvest wireless components

Enables good wireless reception anywhere in the house

Uniform ABUS design

ABUS|

Home Security|

Alarm systems|

Secvest wireless alarm system|

Control devices and extensions|

Secvest wireless repeater

Secvest wireless repeater (Art. no. FUMO50010)

We expressly recommend having this product installed by a certified specialist.

Expanding Secvest’s functional scope
The Secvest wireless repeater is an optional accessory for the Secvest wireless alarm system. It is especially used if the range of one or more wireless components is not sufficient to reach the alarm panel. The Secvest wireless repeater increases the signal strength and thus the range of all Secvest wireless components. A maximum of 10 components per repeater are possible. This helps to ensure optimum wireless reception in every corner of the house.

Note: The Secvest wireless repeater is not compatible with the Secvest 2WAY wireless alarm system, the Terxon wired alarm system and Secvest Wireless Outdoor Sounder FUSG50100.

Art. no.:	FUMO50010
Dimensions:	(WxHxD) 130x155x42 mm
Connections:	Voltage
Display:	3 LED
Type of inputs:	Voltage
Battery type:	1,5V AA Alkaline
Operation:	via Control Panel
Width:	130 mm
Inputs:	power supply, USB
Wireless alarm bandwidth:	20 kHz
Radio frequency:	868,6625 MHz
Transmission power:	10 mW
Housing material:	ABS
Battery quantity:	2
GRS - battery type:	Alkaline
Height:	155 mm
Integrated siren:	No
Length:	42 mm
Max. operating temperature:	55 °C
Max. humidity:	94 %
Max. run time on backup power:	25 h
Max. receiving range (outdoors):	500 m
Max. receiving range (building):	30 m
Max. sending range (outdoors):	500 m
Max. sending range (building):	30 m
Min. operating temperature:	-10 °C
Modulation:	FM
Installation location:	Surface Mounting
Net weight:	0,274 kg
LAN network access:	No
Backup power supply:
Tamper monitoring:
IP protection class:	34
Security level:	2
Fuse:
Software version:	1.3.2
Voltage monitoring:
DC voltage supply:	12 V
Language of instructions:	DE,EN,FR,NL,DK,IT
OSD language:	DE,EN,FR,NL,DK,IT
Power consumption:	50 mA
Transmission path:	Wireless
Environmental class:	II