Secvest Wireless Magnetic Contact FSL (brown) (Art. no. FUMK50010B)

  • Reliably detects opening of windows and doors
  • Connection option for additional wired detectors
  • Can be used as a wireless module
  • Tamper monitoring

Secvest Wireless Magnetic Contact FSL (brown) (Art. no. FUMK50010B)

Bei diesem Produkt empfehlen wir ausdrücklich die Installation durch einen ausgewiesenen Fachmann.

Reliable alarm triggering in the event of intrusion
The wireless opening detector detects and reports the unauthorised opening of doors and windows using a magnetic contact. In such cases, it informs the wireless alarm panel, which then triggers a corresponding alarm.

Detection and reporting
This product consists of a detector and a magnet. These components are mounted parallel to each other on the moving part of the window or door and on the window or door frame. The detector triggers as soon as the distance between the two contact points is increased when the window or door is opened. The components can be mounted on the bottom window frame in order to allow a window to be tilted open without disrupting the magnetic contact.

Even greater protection with additional wired alarm zones
The wireless opening detector also allows the wiring of additional detectors in order to effectively enhance intrusion protection. The detector can be connected to a passive glass breakage detector, for example, which can be mounted to the window pane and detects window breakages. The wireless opening detector for the Secvest wireless alarm system is available in white and brown.

Art. no.: FUMK50010B
Dimensions: (WxHxD) 33x89x29 mm
Connections: Screw terminal (FSL)
Battery type: 3V CR2 Li/MnO2
Width: 33 mm
Type of detection: Magnetic field measurement
Radio frequency: 868,6625 MHz
Transmission power: 10 mW
Housing material: ABS
Height: 89 mm
Length: 29 mm
Power consumption: 0,09 W
Max. battery life: 2 year(s)
Max. operating temperature: 55 °C
Max. sending range (outdoors): 100 m
Max. sending range (building): 30 m
Min. operating temperature: -10 °C
Modulation: FM
Installation location: Windows, doors
Net weight: 0,05 kg
Tamper monitoring:
Sensor type: Reed contact
Security level: 2
Voltage monitoring:
DC voltage supply: 3 V
Status display:
Power consumption: 30 mA
Environmental class: I
Certifications: VdS, INCERT

Scope of delivery:

  • 1x Secvest Wireless Magnetic Contact FSL (brown)
  • 1x Installation material
  • 6x Spacer plates
  • 1x User manual
  • 1x Battery 3 V CR2 Li (FU2990)

Wireless opening detector

The Secvest wireless opening detectors are discreet expansion modules of the ABUS wireless alarm panel. They are magnetic contacts that secure doors and windows. Unauthorized opening is detected and immediately reported to the wireless alarm panel. ...
Other interesting products from the category Wireless opening detector

Questions & answers

FAQ
Security glossary