Extension LCD Keypad for Terxon (Art. no. AZ4111)

  • For operating and programming the alarm panel
  • Suitable for interior areas and protected outer areas
  • Operate your alarm panel with PIN code or proximity chip key
  • Integrated proximity chip key reader

Extension LCD Keypad for Terxon (Art. no. AZ4111)

The LCD Keypad is an extension module for the Terxon SX and Terxon MX. Installed near the entrance door, it allows you to quickly operate your alarm panel. The LCD keypad is connected to the Terxon SX/MX via a 4-wire bus cable. Up to 4 control units can be integrated into the alarm system. Arranged in various parts of your building, these extension modules provide additional convenience. The system can be conveniently activated or deactivated via any keypad using a PIN code and proximity chip key. The status of the alarm control panel is also displayed on the plain text display of the control unit. You can conveniently view and, of course, change system settings, programming and the 250x event memory of the Terxon S/M. The LCD keypad is designed in an elegant white color. Thus, it is not only an enhancement for each entrance area, but it is also optically in line with the wireless components of the Secvest 2WAY.

Art. no.: AZ4111
Dimensions: (WxHxD) 113x90x23 mm
Connections: 4-core bus, screw terminal for additional tamper contact, panic alarm button, and button for manually ending the exit delay
Width: 113 mm
Housing material: ABS
Height: 90 mm
Integrated siren: Integrated buzzer
Length: 23 mm
Power consumption: 0,36 W
Max. operating temperature: 55 °C
Max. humidity: 94 %
Min. operating temperature: -10 °C
Installation location: Indoors and protected outdoor areas
Net weight: 0,2 kg
Tamper monitoring:
IP protection class: 54
Security level: 2
DC voltage supply: 12 V
Power consumption: 30 mA
Environmental class: II
Certifications: INCERT, VSÖ, F&P, NCP

Zum Produkt
Art. no.: AZ4110
Dimensions: (WxHxD) 135x135x30 mm
Connections: 4-core bus, screw terminal for additional tamper contact, panic alarm button, and button for manually ending the exit delay
Width: 135 mm
Housing material: ABS
Height: 135 mm
Integrated siren: Yes
Length: 30 mm
Power consumption: 0,36 W
Max. operating temperature: 55 °C
Max. humidity: 94 %
Min. operating temperature: -10 °C
Installation location: Indoors and protected outdoor areas
Net weight: 0,2 kg
Tamper monitoring: Yes
IP protection class: 54
Security level: 2
DC voltage supply: 12 V
Power consumption: 30 mA
Environmental class: II

Scope of delivery:

  • 1x LCD control panel

Products included:

Control devices

Easy to operate. A large number of control devices are available for the Terxon. They make it easy to arm and disarm your alarm system. Activate the Terxon wired and hybrid alarm system via voice commands, the control panel, chip key, or remote control. ...
Other interesting products from the category Control devices

Questions & answers

FAQ
Security glossary