Seismic Alarm Sensor (white) (Art. no. EM2000W)

  • Innovative seismic detector
  • Detects all types of vibrations, such as from breaking or prying open, breaches or movement
  • Adjustable to two sensitivity levels

Seismic Alarm Sensor (white) (Art. no. EM2000W)

For trouble-free and safe operation, this device must be installed and regularly maintained by a specialist trained by us. Arrange regular maintenance appointments with your installer to ensure trouble-free operation over the long term with the latest safety updates and new functions

The seismic alarm sensor reacts to seismic signals and vibrations. Vibrations such as those caused by attempts to break in are detected and reported to the alarm center. The sensor registers the vibration of the surface on which it is mounted. The best place to install the seismic alarm sensor is on objects that are not to be moved (a safe, or other valuable objects) or penetrated (wooden doors, glass walls, plaster walls). The detection diameter is up to 4 meters, depending on the material. Large wooden walls or window frontages can be protected with a single sensor. The patented frequency analysis detects the difference between knocks and penetrations. This protects the sensor from false alarms. On the seismic alarm sensor, you can choose between two sensitivity levels by means of a jumper. You can make fine adjustments to this setting with a sensitivity potentiometer. An LED alarm memory is integrated into the seismic alarm sensor. When the sensor triggers, the LED lights up. The alarm memory is not reset until the voltage supply is removed (1 second). The operating voltage is between 9 and 16 V DC. The Seismic alarm sensor is available in white (EM2000W) and brown (EM2000B).

Art. no.: EM2000W
VdS class: none
Dimensions: (WxHxD) 25x85x23 mm
Connections: NC, 150 mA, 24V DC, 10 Ohm 1/4 P
Width: 25 mm
Type of detection: Vibration detection
Adjustable sensitivity:
Housing material: ABS
Height: 85 mm
Length: 23 mm
Power consumption: 383,526 W
Max. operating temperature: 60 °C
Tamper monitoring:
Sensor type: Piezo sensor
DC voltage supply: 9-16 V
Status display:
Power consumption: 9 mA

Scope of delivery:

  • 1x Seismic Alarm Sensor (white)
  • 1x Installation material

General Downloads:


Glass break and shock detectors

Glass surfaces are vulnerabilities that intruders like to use to gain entry into houses and apartments. Installation of additional glass breakage and shock detectors is recommended here. ...
Other interesting products from the category Glass break and shock detectors

Questions & answers

Security glossary