Opening Detector, 5m, 2-core (white) (Art. no. MK2000W)

  • For reliable perimeter protection
  • For protecting doors and windows

Opening Detector, 5m, 2-core (white) (Art. no. MK2000W)

The opening detector is a magnetic contact for protecting doors and windows. Unauthorised opening is detected and reported to the alarm panel. The opening detector consists of a magnetic contact (reed) and a magnet. These are fitted parallel, in front of, or at right angles to each other at a minimum distance of 13 mm apart. The electric circuit of this NO opening detector is normally open (NO). If the distance between reed and magnet increases by ca. 2 cm, the circuit is closed and an alarm reported. The optimum installation location is the middle of the door or window frame. It can also be fitted to the bottom of the window frame if a particular window with a magnetic contact is to be tilted open. The detector is suitable for both flush and surface-mounted installation. The opening detector is available in white and brown.

Art. no.: MK2000W
VdS class: none
Dimensions: (WxHxD) 11x12x48 mm
Connections: NO, max. contact capacity 100 V / 5 W / 0.05 A
Width: 11 mm
Type of detection: Magnetic field measurement
Stray-field protection:
Housing material: ABS
Height: 12 mm
Cable type: 2-core
Cable length: 5 m
Length: 48 mm
Installation location: Integration / surface mounting
Sensor type: Reed contact

Scope of delivery:

  • 1x Opening Detector
  • 1x Magnet

General Downloads:

Opening detectors

Seamless protection of the external shell is the cornerstone of every electronic home security system. The opening detectors of the Terxon wired alarm system secure doors and windows. Surface-mounted and flush-mounted versions are available for installation depending on requirements. ...
Other interesting products from the category Opening detectors

Questions & answers

Security glossary