Wi-Fi Outdoor Camera & App (Art. no. TVAC19100B)

  • For flexible outdoor use
  • Guided step-by-step installation via app (iOS, Android)
  • App access of up to 8 cameras
  • HD 720p resolution and infrared night vision function for brilliant image quality
  • Professional integrated motion detection (PIR sensor)
  • E-mail notification, snapshot function and push notification via app when motion is detected
  • Sturdy, weatherproof outdoor camera (IP66)
  • Recording to SD card (accessory, max. 32 GB)
  • Low network load thanks to compressed data transfer (H.264 compression)

Wi-Fi Outdoor Camera & App (Art. no. TVAC19100B)

Perfect all-around protection in outdoor areas
This weatherproof WLAN outdoor camera comes with a compatible app for iOS or Android which even technical laymen can use to quickly and easily install the system. With a resolution of 720p and integrated infrared night vision function, the camera delivers brilliant image quality both day and night.

Event notification and mobile access via app
Movements within the detection range of the camera are reliably identified by the passive infrared sensor. Recording on the SD card starts automatically. If desired, you will be informed of incidents by e-mail or push notification and can take a snapshot or view the corresponding video image data using the app. With the app, you have simultaneous access to the image material of up to eight cameras. The efficient H.264 data compression reduces the network load to a minimum and increases the storage volume.

Note on the product:
This product can only be set up and operated using the app and is not compatible with online access, PC software or recorders.

The effective IR range will depend on the installation location. If there are surfaces that absorb light or no objects that reflect IR light in the field of view, the IR range will be reduced and/or the video image will be too dark. Reflective objects in the immediate vicinity of the camera (e.g. roof gutter or wall) may also result in the reflection of IR light, which can disturb the image.

Art. no.: TVAC19100B
Number of simultaneous accesses: 3
Dimensions: 134 x 67 x 48 mm
Number of IR LEDs: 6
Recording resolution @ frame rate per camera: 720p @ 5/ 10/ 20 fps (max.) incl. audio
Resolution modes: HD 1280 x 720 incl. audio pixel
Image sensor: MP CMOS
Frame rate: VGA @ 20 fps / VGA @ 25 fps / 720p @ 5 fps / 720p @ 10
Horizontal angle: 50°±3°
Width: 67 mm
Focal length: 2,8 mm
Frequency: 2,4 GHz
Housing material: Waterproof metal
Height: 48 mm
IR LEDs: 6 IR Power LEDs
IR range (up to): 5 m
IR cut filter:
Length: 134 mm
Max. operating temperature: 50 °C
Min. operating temperature: -10 °C
Minimum illumination (color): 1 lx
Net weight: 0,3 kg
Network access: Ethernet (10/100 Base-T/Base-TX); Wi-Fi (IEEE 802.11 b/g/n)
Network camera protocols: TCP/IP, UDP, SMTP, NTP, DHCP, ARP
PIR range: 3 m
Range of night vision function: 5 m
IP protection class: 66
DC voltage supply: 5 V
Power consumption: 500 mA
Encryption: WPA /WPA2/WPA2-PSK (TKIP, 128 bit AES)
Video compression: H.264

Scope of delivery:

  • 1x Wi-Fi outdoor camera & app
  • 1x Power supply unit including EU, Australian and UK adapters , 5 V DC/1.5 A
  • 1x LAN adapter cable
  • 1x Camera mount including mounting material
  • 1x Antenna
  • 1x User Manual

Software:

  • Firmware

    • Firmware TVAC19100 Firmware compatible with: TVAC19000, TVAC19100HistoryVersion: V1.0.9.16Release date: 02/07/2017File name: mbootpImageNote:Follow the steps below to perform the firmware update: (Available with Firmware 1.0.9.11)1. Open the advanced settings of the camera in the App2Cam App (The camera checks every 6 hours, if a new firmware is available)2. Confirm the Firmware-Update3. Wait about 5 minutes until the firmware-update is doneIf your camera has a lower firmware-version please use the following steps to perform the firmware-udpate:1. Copy the mbootpImage file onto an empty micro SD card.2. Disconnect the camera from the mains voltage.3. Insert the micro SD card into the camera.4. Connect the camera to a power supply.5. You must not disconnect the camera from the power supply during the firmware update, as this may result in irreparable damage to the device.6. Wait for threeminutes until the firmware update is complete. Once the update has been successful, the camera will once again register as an access point.7. The firmware file will be changed to mbootpImage.done. To perform a firmware update on another camera, copy the file onto the micro SD card again and repeat all of the installation steps.Changes:1. Optimized WiFi-Strength2. WiFi automode "None" and "WiFi" added3. Optimized Push-Notifications4. Bug-fixes

Product recommendations

Questions & answers

FAQ
Security glossary