Secvest Wireless Remote Control (Art. no. FUBE50015)

  • User-friendly remote control with easily identifiable key symbols
  • For use with Secvest, Secvest IP and Secvest 2 WAY wireless alarm systems
  • Features ‘arm’, ‘disarm’ and ‘status query’ keys
  • 8 LEDs provide an overview and display current system status
  • Button for custom configuration available (Secvest wireless alarm system only)
  • Communicates with the Secvest and Secvest Touch via a secure wireless connection

Secvest Wireless Remote Control (Art. no. FUBE50015)

For trouble-free and safe operation, this device must be installed and regularly maintained by a specialist trained by us. Arrange regular maintenance appointments with your installer to ensure trouble-free operation over the long term with the latest safety updates and new functions.

Convenient operation of the alarm control panel
The bi-directional wireless remote control is a practical accessory for controlling Secvest wireless alarm systems at the touch of a button. It also allows the current system configuration status to be viewed at any time. The FUBE50015 remote control is compatible with Secvest, Secvest IP and Secvest 2 WAY wireless alarm units.
Reliable arming at long range
The remote control enables convenient arming and disarming of the alarm system from a distance. Thanks to eight integrated LEDs, real-time feedback is provided regarding changes to the system status. The transmission range is approx. 30 metres.
Rapid assistance in an emergency
Simultaneously pressing the ‘arm’ and ‘disarm’ buttons triggers a panic alarm. This ensures the health and safety of residents as well as protecting your possessions.
Display of additional information
By pressing the third button, important information about the status of the alarm control panel can be queried (armed, disarmed, internal protection active, fault). Feedback appears on the remote control immediately.
Useful convenience functions
The fourth button is fully programmable. Along with arming the alarms for the interior, it can also be used to activate an output (e.g. to control a garage door). This button can be programmed directly on the alarm control panel.
Secure wireless communication
Thanks to a secure wireless communication procedure, this product is protected against ‘replay attacks’, as are the Secvest wireless alarm system and Secvest Touch alarm systems. This procedure for preventing third party tampering exceeds the requirements of the “DIN EN 50131-1 level 2” security standard.

Art. no.: FUBE50015
VdS class: home
Approval no.: H114001
Dimensions: (WxHxD) 36 x 17 x 62 mm
Display: LED
Battery type: CR2450 3V Li-Mn (FU2987)
Width: 36 mm
Radio frequency: 868,6625 MHz
Transmission power: 10 mW
Housing material: ABS
Height: 17 mm
Length: 62 mm
Max. battery life: 2 y
Max. operating temperature: 40 °C
Max. humidity: 75 %
Max. receiving range (outdoors): 200 m
Max. receiving range (building): 30 m
Max. sending range (outdoors): 200 m
Max. sending range (building): 30 m
Min. operating temperature: -10 °C
Modulation: FM
Net weight: 0,035 kg
Security level: 2
Voltage monitoring:
DC voltage supply: 3 V
Language of instructions: DE, UK, FR, NL, DK, ES
Environmental class: II
Certifications: VdS home

Scope of delivery:

  • 1x Wireless remote control
  • 1x Batterie CR2450 3 V Li-Mn (FU2987)
  • 1x Manual
  • 1x ABUS lanyard

General Downloads:



Control devices and extensions

The Secvest can be easily operated. It can be armed and disarmed by remote control, button, PIN code, chip key, the turn of a key, or using a mobile phone. The response in the form of a voice announcement, an optical or acoustic signal lets you know the status of the system. ...
Other interesting products from the category Control devices and extensions

Questions & answers

Security glossary