Secvest Wireless WAM-Repeater Kit (Art. no. FUMO50025)

  • Wireless accessory module: pre-configured as a repeater
  • To expand the range and amplify the signal strength of Secvest wireless components
  • Complete set including wireless accessory module, battery pack, power supply unit, pairing guide
  • It is no longer possible to purchase individual components
  • Unbeatable price-performance ratio

Secvest Wireless WAM-Repeater Kit (Art. no. FUMO50025)

We expressly recommend having this product installed by a certified specialist.

Extending the functional scope of the Secvest
The wireless accessory module that is pre-configured as a repeater is available as an optional accessory and provides amplified signal strength as well as expanded range. Delivery prior to configuration as a repeater eliminates the need for retroactive configuration to a repeater function, thus valuable time and effort can be saved.

No expensive individual sale of components
The Secvest WAM-repeater set includes all the components necessary for the using the wireless accessory module as a repeater. This includes the wireless accessory module, (item no. FUMO50020), battery pack for the wireless accessory module (item no. FU3821), an international power supply unit (item no. AZZU10010) as well as an extensive and intuitive pairing guide for wireless components (item no. MOTH50200).

Unrestricted use as a wireless accessory module is still possible
The wireless accessory module that is pre-configured as a repeater can still be used as an output module, a transmitter and receiver module, a sounder module, a sounder transmitter and receiver, or even a receiver module. A detailed description of the numerous possible functions can be found in the item description of the wireless accessory module (item no. FUMO50020).
Note: The repeater is not compatible with rolling code products.

Art. no.: FUMO50025
Dimensions: (WxHxD)220x160x310 mm
Connections: 4 x transistor relay (NO/NC), max. switch capacity 500 mA, 24 V DC, R=2 / 1 x RJ12 for control of the siren
Display: 10 LEDs
Battery type: 6V DC, 1.2Ah
Operation: Dip Switches
Width: 220 mm
Gross weight: 1,424 kg
Radio frequency: 868,6625 MHz
Housing material: ABS
Height: 160 mm
Length: 310 mm
Max. run time on backup power: 12 h
Max. receiving range (outdoors): 100 m
Max. receiving range (building): 30 m
Max. sending range (outdoors): 100 m
Max. sending range (building): 30 m
Modulation: FM
Installation location: Surface Mounting
Net weight: 0,85 kg
Backup power supply:
Tamper monitoring:
DC voltage supply: 12 V

Zum Produkt
Art. no.: FUMO50020
Dimensions: (WxHxD) 122x208x42 mm
Connections: 4 x transistor relay (NO/NC), max. switch capacity 500 mA, 24 V DC, R=2 / 1 x RJ12 for control of the siren
Display: 10 LEDs
Battery type: 6V DC, 1.2Ah
Width: 122 mm
Radio frequency: 868 MHz
Transmission power: 10 mW
Housing material: ABS
Height: 208 mm
Length: 42 mm
Power consumption: 0,84 W
Max. run time on backup power: 12 h
Max. receiving range (outdoors): 100 m
Max. receiving range (building): 30 m
Max. sending range (outdoors): 100 m
Max. sending range (building): 30 m
Modulation: FM
Net weight: 0,33 kg
Backup power supply: Yes
Tamper monitoring: Yes
Voltage monitoring: Yes
DC voltage supply: 12 V
Power consumption: 70 mA
Zone closure: EOL, CC


Zum Produkt
Art. no.: AZZU10010
Dimensions: (W x H x D) about 44 x 74 x 35 mm
Width: 44 mm
Housing material: ABS (white)
Height: 74 mm
Cable length: 1,5 m
Length: 35 mm
Max. operating temperature: 40 °C
Max. humidity: 80 %
Min. operating temperature: 0 °C
AC voltage supply: 100 − 240 V

Control devices and extensions

The Secvest can be easily operated. It can be armed and disarmed by remote control, button, PIN code, chip key, the turn of a key, or using a mobile phone. The response in the form of a voice announcement, an optical or acoustic signal lets you know the status of the system. ...
Other interesting products from the category Control devices and extensions

Questions & answers

FAQ
Security glossary