Wireless Universal Module (Art. no. FUMO50020)

  • An option which expands the range of Secvest generation wireless detectors
  • Output module with 4 outputs (switching power 500 mA)
  • Siren module can be used as siren sender/receiver
  • Supports perimeter breach alarms, e.g. when outdoor motion detectors are used
  • Converts wired systems into hybrid alarm systems

Wireless Universal Module (Art. no. FUMO50020)

For trouble-free and safe operation, this device must be installed and regularly maintained by a specialist trained by us. Arrange regular maintenance appointments with your installer to ensure trouble-free operation over the long term with the latest safety updates and new functions.

Expanding Secvest's functional scope
The Secvest wireless accessory module is an optional Secvest accessory. The wireless accessory module (WAM) can also be integrated into wired systems, such as the Terxon SX and Terxon MX, allowing additional wireless components to be used in wired alarm systems. The module has 6 main functions. The WAM is powered by a 12 V power supply unit. The wireless accessory module (WAM) can not be used with rolling code components.

Repeater module (doubles the range):
The WAM forwards signals from up to 8 detectors to the alarm panel, essentially doubling the wireless transmission range.
Note: No repeating of the radio control unit FUBE50000, Rolling Code components and the wireless outdoor siren FUSG50100

Output module (e.g. home automation):
Up to 4 outputs (switching capacity 500 mA) in the WAM are activated for programmed events. Transmitter/receiver module: in addition to the 4 outputs, the alarm inputs on the WAM (1 x alarm, 1 x tampering) are utilised.

Sounder module:
The WAM can be used to connect an external sounder (sounder & flashing light) to the Secvest (meaning a wired sounder will also respond to wireless signals).

Sounder transmitter/receiver:
The WAM can be used to integrate a wireless sounder into a wired alarm system.

Receiver module:
Using a WAM, 8 wireless components can be integrated into any wired system. The WAM receives the signals from the wireless detector and activates the alarm system. This allows the Secvest detectors to be integrated into the Terxon alarm control panel.

Art. no.: FUMO50020
VdS class: none
Dimensions: (WxHxD) 122x208x42 mm
Connections: 4 x transistor relay (NO/NC), max. switch capacity 500 mA, 24 V DC, R=2 / 1 x RJ12 for control of the siren
Display: 10 LEDs
Battery type: 6V DC, 1.2Ah
Width: 122 mm
Radio frequency: 868 MHz
Transmission power: 10 mW
Housing material: ABS
Height: 208 mm
Compatible with: Secvest, Terxon
Length: 42 mm
Power consumption: 0,84 W
Max. run time on backup power: 12 h
Max. receiving range (outdoors): 100 m
Max. receiving range (building): 30 m
Max. sending range (outdoors): 100 m
Max. sending range (building): 30 m
Modulation: FM
Net weight: 0,33 kg
Backup power supply:
Tamper monitoring:
Voltage monitoring:
DC voltage supply: 12 V
Power consumption: 70 mA
Zone closure: EOL, CC

Scope of delivery:

  • 1x Wireless universal module
  • 1x mounting material
  • 1x manual

Required accessories:

International Switching-Mode Power Supply 12 V/1.5 A (Cord)

Control devices and extensions

The Secvest can be easily operated. It can be armed and disarmed by remote control, button, PIN code, chip key, the turn of a key, or using a mobile phone. The response in the form of a voice announcement, an optical or acoustic signal lets you know the status of the system. ...
Other interesting products from the category Control devices and extensions

Questions & answers

Security glossary