Seismic Alarm Sensor (white) (Art. no. AZEM10000)

  • Innovative vibration detector for wooden doors, glass and plaster walls, safes, display cases, etc.
  • Detects any type of vibration triggered by breaking, prying open, breaking through, or moving, for example
  • Optimized digital filter for background noise suppression
  • Adjustable sensitivity with direct triggering in the event of rough use of force
  • Reliable early detection of break-in attempts

Seismic Alarm Sensor (white) (Art. no. AZEM10000)

For trouble-free and safe operation, this device must be installed and regularly maintained by a specialist trained by us. Arrange regular maintenance appointments with your installer to ensure trouble-free operation over the long term with the latest safety updates and new functions.


Monitors walls, doors, valuables:
The vibration detector responds to structure-borne sound signals and vibrations. Vibrations, which typically occur during break-in attempts, are detected and reported to the alarm control center. The detector detects vibrations in the surface on which it is mounted. The vibration detector is therefore best placed on objects that you do not intend to move (safes, valuable objects) or should not be broken through (wooden doors, glass walls, plaster walls).
Sensitive detection, precise and finely adjustable:
Sensitivity can be individually adjusted for the specific area exposed to vibration. In addition, the detector has a digital filter of the latest generation for the detection or suppression of background noise. This ensures a high level of security against false alarms.
Instant alert:
Depending on the level of sensitivity set, an alarm will be triggered immediately when the use of brute force is detected. The detector thus detects any attempted break-ins at an early stage.
Compatible e.g. with the ABUS Terxon wire alarm system.

Art. no.: AZEM10000
VdS class: none
Dimensions: (WxHxD) 30x108x22 mm
Width: 30 mm
Type of detection: Vibration detection
Adjustable sensitivity:
Housing material: ABS
Height: 108 mm
Length: 22 mm
Max. operating temperature: 55 °C
Min. operating temperature: -10 °C
Tamper monitoring:
Sensor type: Piezo sensor
DC voltage supply: 9-16 V
Status display:
Power consumption: 30 mA

Scope of delivery:

  • 1x Seismic Alarm Sensor (white)

General Downloads:

Glass break and shock detectors

Glass surfaces are vulnerabilities that intruders like to use to gain entry into houses and apartments. Installation of additional glass breakage and shock detectors is recommended here. ...
Other interesting products from the category Glass break and shock detectors

Questions & answers

Security glossary