Eycasa Door Intercom (Art. no. CASA31000)

  • Door & house wireless video system for watching, speaking, listening and switching
  • 3 in 1: Communication, door opener plus video surveillance
  • The set includes a video door unit and main unit
  • Secure wireless transmission of picture and sound between door and main unit
  • Night vision in close proximity to the camera (IR LEDs)
  • 3 wireless cameras
  • Installation in covered outdoor area (IP54)
  • Operated using the bell transformer
  • Ideal for retrofitting in existing buildings

Eycasa Door Intercom (Art. no. CASA31000)

We expressly recommend having this product installed by a certified specialist.

The Eycasa wireless intercom system consists of a video door unit and a main unit. The door unit is a communication unit including door opener function and integrated video camera for operating in the day or night. The main unit offers a high level of convenience and flexible extension options.

Security & convenience in one package: communication, door opener, video surveillance
Eycasa is more than just a two-way communication system: it shows who is at the door and has the option of communicating via the main unit as well as switching the door opener. The system can be extended by 3 other wireless cameras so that other entrances (terrace, cellar doors, garage etc.) near the front door are secured.

Main unit: the convenient switching center with no cables
All the data is gathered in the main unit: On the 7” touchscreen color display, the video picture from the door unit is displayed, moreover the two-way communication function and the door opener on the unit can be switched on. It is easy to operate by hand – the main unit communicates wirelessly with the door unit without any annoying cables in the living room. The unit takes up to 4 cameras, which are shown on the monitor at the same time and can be extended with additional components. It is suitable for mounting on the wall and on a table.

Video door station: easy installation, good for retrofitting in existing buildings
The door unit can be installed horizontally or vertically. The connections of a previous intercom can also be used. The power supply is connected to the existing bell transformer - or a battery can also be used. Apart from this no other cables are necessary – the entire system is based on wireless components.

Can be flexibly extended with additional components
The system grows along with the requirements of the inhabitants. It can be extended by 3 wireless cameras.

Art. no.: CASA31000

Zum Produkt
Art. no.: CASA30100
Installation: Surface mounting
Video frequency: 2,4 GHz
Video modulation: FHSS+GFSK FM / AM
Video data rate: 2 EU571001
Video transmission power: 13,5
Video sensitivity: -82
Audio frequency: 1,9 GHz
Audio modulation: TMDA FM / AM
Audio transmission power: 20
Audio sensitivity: -82
Audio data rate: 0,064 EU571001
Proximity key: Up to 10 keys can be paired
Alarming: Doorbell signal on main unit
Connectible devices: Eycasa main unit
Number of IR LEDs: 8
Resolution: 640 x 480 pixels (VGA)
Orientation: Horizontal or vertical °
Battery type: 6 x 1.5 V AA (CASA30150)
Operating mode: Permanent power supply or battery-operated
Image sensor: 1/4" CMOS
Frame rate: 20 fps
Width: 135 mm
Focal length: 2,5 mm
Wireless range: 30 (depending on the site conditions) 30 m
Height: 315 mm
Horizontal angle of view: 120 °
IR angle: 120 °
IR range (up to): 1,5 m
IR cut filter: No
Length: 32 mm
Loudspeaker: 8 Ohm, 2 W x 1
Max. battery life: 0,5
Max. operating temperature: 50 °C
Microphone: Yes
Min. operating temperature: -10 °C
Net weight: 0,6 kg
Relay outputs: 2 (potential-free, NO, max. 1A AC, max. 2A DC)
IP protection class: 54
AC voltage supply: 12 – 24 V
DC voltage supply: 12 – 24 V
Power consumption: 800 mA
Video compression: MPEG-4


Video frequency: 2,4 GHz
Video modulation: FHSS+GFSK FM / AM
Video data rate: 2 EU571001
Video transmission power: 13,5
Video sensitivity: -82
Audio frequency: 1,9 GHz
Audio modulation: TMDA FM / AM
Audio transmission power: 20
Audio sensitivity: -82
Audio data rate: 0,064 EU571001
Connectible devices: Eycasa main unit
Number of channels: 4
Resolution: 800 x 600
Mount: Table mount, wall mount
Width: 185 mm
Adjustable alarm tone: 5 doorbell tones
Event log: 500
Wireless range: 30 m (depending on site conditions) * m
Height: 200 mm
Length: 100 mm
Loudspeaker: 8 Ohm, 2 W x 2
Max. operating temperature: 50 °C
Microphone: Yes
Min. operating temperature: -10 °C
Monitor: 7" touchscreen LCD
Net weight: 0,67 kg
Network access: RJ45
IP protection class: 30
DC voltage supply: 12 V
Storage medium: SDHC card, max. 32 GB
Power consumption: 800 mA

Products included:

General Downloads:

Downloads for included products:

Software:

  • Firmware

    • Eycasa_CASA31000_v2084 Firmware compatible with: CASA31000 (Eycasa main unit)Viewer/launcher version: V2.0.2034Firmware version: 2083Release date: 29/06/2015File name: Eycasa_CASA31000_v2_0_2034.zipAmendments:1. How to resolve a sporadic fault causing video recordings to be displayed incorrectly in the event list.2. How to resolve a sporadic fault causing the permanent loss of the pairing between a component and the alarm control panel.Instructions for the update:1. Copy the 'firmware' folder from the zip file ('Eycasa_CASA31000_v2_0_2034.zip') onto an SD card (FAT32 format).2. Once you have unzipped the file, you should have the 'firmware' folder, including the update files, on your SD card.3. Insert the SD card into the Eycasa main unit.4. Restart the Eycasa main unit.5. Switch to the 'Settings' menu and select 'Software update'.6. Press the 'Start update' button.Notes:1. Do NOT disconnect the main unit from the mains power supply during the update and do not remove the SD card until the device has been restarted. The update should take a few minutes.2. All settings and device pairings should still be the same after the update.3. In the event of sporadic problems after the update, proceed as follows:- Reset your system back to its default factory settings.- Disconnect all components from the power supply and remove any batteries.- Reconnect the components to the power supply and teach in the components again.

Product recommendations

Questions & answers

FAQ
Security glossary