Wi-Fi-enabled Outdoor Camera & App (Item no. TVAC19100C)

  • For flexible outdoor use
  • Guided step-by-step installation via app (iOS, Android)
  • App access of up to 8 cameras
  • HD 720p resolution and infrared night vision function for brilliant image quality
  • Professional integrated motion detection (PIR sensor)
  • E-mail notification, snapshot function and push notification via app when motion is detected
  • Sturdy, weatherproof outdoor camera (IP66)
  • Recording to SD card (accessory, max. 32 GB)
  • Low network load thanks to compressed data transfer (H.264 compression)

Wi-Fi-enabled Outdoor Camera & App (Item no. TVAC19100C)

Perfect all-around protection in outdoor areas
This weatherproof WLAN outdoor camera comes with a compatible app for iOS or Android which even technical laymen can use to quickly and easily install the system. With a resolution of 720 p and integrated infrared night vision function, the camera delivers brilliant image quality both day and night.

Event notification and mobile access via app
Movements within the detection range of the camera are reliably identified by the passive infrared sensor. Recording on the SD card starts automatically. If desired, you will be informed of incidents by e-mail or push notification and can take a snapshot or view the corresponding video image data using the app. With the app, you have simultaneous access to the image material of up to eight cameras. The efficient H.264 data compression reduces the network load to a minimum and increases the storage volume.

Note on the product:
This product can only be set up and operated using the app and is not compatible with online access, PC software or recorders.

The effective IR range will depend on the installation location. If there are surfaces that absorb light or no objects that reflect IR light in the field of view, the IR range will be reduced and/or the video image will be too dark. Reflective objects in the immediate vicinity of the camera (e.g. roof gutter or wall) may also result in the reflection of IR light, which can disturb the image.

Item no.: TVAC19100C
Number of simultaneous accesses: 3
Range of night vision function (foot): 16 ft
Max. operating temperature (Fahrenheit): 122 °F
Min. operating temperature (Fahrenheit): 14 °F
Dimensions: 134 x 67 x 48 mm
Number of IR LEDs: 6
Resolution modes: HD 1280 x 720 incl. audio pixel
Image sensor: MP CMOS
Frame rate: VGA @ 20 fps / VGA @ 25 fps / 720p @ 5 fps / 720p @ 10 fps
Horizontal angle: 50°±3°
Width: 67 mm
Focal length: f2.8 mm mm
Frequency: 2,4 GHz
Housing material: Waterproof metal
Height: 48 mm
IR LEDs: 6 IR Power LEDs
IR range (up to): 5 m
IR cut filter: Yes
Length: 134 mm
Max. resolution @ frame rate: 720p @ 5/ 10/ 20 fps (max.) incl. audio
Minimum illumination (color): 1 lx
Net weight: 0,3 kg
Network access: Ethernet (10/100 Base-T/Base-TX); Wi-Fi (IEEE 802.11 b/g/n)
Network camera protocols: TCP/IP, UDP, SMTP, NTP, DHCP, ARP
PIR range: 5 m
Range of night vision function: 5 m
IP protection class: 66
DC voltage supply: 5 V
Power consumption: 500 mA
Encryption: WPA /WPA2/WPA2-PSK (TKIP, 128 bit AES)
Video compression: H.264

Scope of delivery:

  • 1x Wi-Fi outdoor camera & app
  • 1x Power supply unit, 5 V DC/1.5 A
  • 1x LAN adapter cable
  • 1x Camera mount including mounting material
  • 1x Antenna

Software:

  • Firmware

    • Firmware TVAC19100 Firmware compatible with: TVAC19000, TVAC19100HistoryVersion: V1.0.9.11Release date: 11/124/2016File name: mbootpImageNote:Follow the steps below to perform the firmware update:1. Copy the mbootpImage file onto an empty micro SD card.2. Disconnect the camera from the mains voltage.3. Insert the micro SD card into the camera.4. Connect the camera to a power supply.5. You must not disconnect the camera from the power supply during the firmware update, as this may result in irreparable damage to the device.6. Wait for threeminutes until the firmware update is complete. Once the update has been successful, the camera will once again register as an access point.7. The firmware file will be changed to mbootpImage.done. To perform a firmware update on another camera, copy the file onto the micro SD card again and repeat all of the installation steps.Changes:1. Corrected Behaviour of Push-Notification2. Better Camera stability3. New function OTA (Firmware-update now possible via Server - only with exisiting SD-Card)4. Improved PT controls (only TVAC19000)

Digital wireless surveillance sets

Video surveillance was rarely so simple and reliable while simultaneously being able to be used at any time and being nearly self-explanatory. The motion detectors of the camera detect movement in the environment and transmit what is happening to the monitor, which can then save the signal to an SD card – while playback is simultaneously provided on the monitor. Even at night and with audio. ...
Other interesting products from the category Digital wireless surveillance sets