Wi-Fi-enabled Pan/Tilt Camera & App (Item no. TVAC19000C)

  • For effective all-round monitoring of interior spaces
  • Guided step-by-step installation via app (iOS, Android)
  • App access of up to 8 cameras
  • HD 720p resolution and infrared night vision function for brilliant image quality
  • E-mail notification, snapshot function and push notification via app when motion is detected
  • All-around visibility (350° panning and 90° tilting range)
  • Recording to SD card (accessory, max. 32 GB)
  • Low network load thanks to compressed data transfer (H.264 compression)

Wi-Fi-enabled Pan/Tilt Camera & App (Item no. TVAC19000C)

Effective all-around monitoring indoors
This WLAN pan/tilt camera comes with the compatible app for iOS or Android and offers brilliant image quality at any time of day or night with a resolution of 720p. The camera can monitor 350° in the panning range and 90° in the tilting range. Thanks to the app, installation is quick and easy even for technical laymen.

Event notification and mobile access via app
Movement within the field of vision of the camera triggers recording on the SD card. If desired, you will be informed of incidents by e-mail or push notification and can take a snapshot or access the corresponding video image data using the app. Using the app, you also have access to the image material of up to eight cameras at the same time, enabling mobile monitoring wherever you are. The effective data compression of the camera relieves the network and increases storage space.

Note on the product:
This product can only be set up and operated using the app and is not compatible with online access, PC software or recorders.

The effective IR range will depend on the installation location. If there are surfaces that absorb light or no objects that reflect IR light in the field of view, the IR range will be reduced and/or the video image will be too dark. Reflective objects in the immediate vicinity of the camera (e.g. roof gutter or wall) may also result in the reflection of IR light, which can disturb the image.

Item no.: TVAC19000C
Number of simultaneous accesses: 3
Range of night vision function (foot): 10 ft
Max. operating temperature (Fahrenheit): 122 °F
Min. operating temperature (Fahrenheit): 14 °F
Dimensions: 87 x 80 x 115 mm
Resolution modes: HD 1280 x 720 incl. audio pixel
Image sensor: MP CMOS
Frame rate: VGA @ 20 fps / VGA @ 25 fps / 720p @ 5 fps / 720p @ 10 fps
Width: 7.924,7999879543040183 mm
Focal length: f2.8 mm mm
Frequency: 2,4 GHz
Housing material: Plastic
Height: 115 mm
Horizontal angle of view: 50°±3° °
IR LEDs: 5 IR Power LEDs
IR range (up to): 5 m
IR cut filter: Yes
Length: 87 mm
Max. resolution @ frame rate: 720p @ 5/ 10/ 20 fps (max.) incl. audio
Minimum illumination (color): 1 lx
Net weight: 0,35 kg
Network access: Ethernet (10/100 Base-T/Base-TX); Wi-Fi (IEEE 802.11 b/g/n)
Network camera protocols: TCP/IP, UDP, SMTP, NTP, DHCP, ARP
Pan/tilt area: 270° / 90°
DC voltage supply: 5 V
Power consumption: 500 mA
Encryption: WPA /WPA2/WPA2-PSK (TKIP, 128 bit AES)
Video compression: H.264

Scope of delivery:

  • 1x Wi-Fi pan/tilt camera & app
  • 1x Power supply, 5 V DC/1.5 A
  • 1x LAN cable
  • 1x Ceiling mount
  • 1x Antenna

Software:

  • Firmware

    • Firmware TVAC19000 Firmware compatible with: TVAC19000, TVAC19100HistoryVersion: V1.0.9.11Release date: 11/124/2016File name: mbootpImageNote:Follow the steps below to perform the firmware update:1. Copy the mbootpImage file onto an empty micro SD card.2. Disconnect the camera from the mains voltage.3. Insert the micro SD card into the camera.4. Connect the camera to a power supply.5. You must not disconnect the camera from the power supply during the firmware update, as this may result in irreparable damage to the device.6. Wait for threeminutes until the firmware update is complete. Once the update has been successful, the camera will once again register as an access point.7. The firmware file will be changed to mbootpImage.done. To perform a firmware update on another camera, copy the file onto the micro SD card again and repeat all of the installation steps.Changes:1. Corrected Behaviour of Push-Notification2. Better Camera stability3. New function OTA (Firmware-update now possible via Server - only with exisiting SD-Card)4. Improved PT controls (only TVAC19000)

WLAN pan/tilt cameras

Laying cables is often impossible or not desired. In this case WLAN cameras are an option, since they transmit video signals over the wireless network to the PC or router. WLAN pan/tilt cameras remain flexible even after installation: depending on the camera type, they can be moved (panned and tilted) over the Internet or via app. ...
Other interesting products from the category WLAN pan/tilt cameras