Secoris wireless indoor siren (acoustic signal transmitter)

The wireless indoor siren supports the wireless outdoor siren and the Secoris intrusion alarm control panel with a loud signal tone of more than 80 dB in the event of an alarm

Description

FUSG60110 ALARM THROUGHOUT THE BUILDING

Loud support for the alarm system
In the event of an alarm, the wireless indoor siren supports alerting by the Secoris intrusion alarm control panel and wireless outdoor siren with a loud signal tone (above 80 dB).

Signalling for system operation
The clear feedback for operating inputs and the status of the alarm system offers a high level of operating convenience and protection against false alarms. The siren signals an input/output delay ("countdown timer") and emits confirmation tones when arming/disarming the Secoris. This facilitates operation and avoids false alarms due to operating errors. A door chime is also included in the range of functions.

Quickly integrated into the Secoris system
The battery-operated wireless indoor siren can be quickly and easily connected and integrated into the Secoris system. Alternative: Low-maintenance operation with power supply via an external power supply unit. Thanks to its discreet housing design, the indoor siren is also ideally suited for environments with high aesthetic demands.

Tamper protection
The indoor siren communicates with the Secoris wireless extension (BUMO60030) via Secoris wireless mode. Transmission is AES128-encrypted and protected against replay attacks.
The integrated sabotage protection (cover/wall tear-off contact) offers robust protection: if someone tampers with the housing, the siren immediately sounds an alarm and reports the sabotage to the Secoris control panel.

Awards & Partners

Product advantages

Signal transmitter for alerting by means of siren
Loud alarm siren (> 80 dB(A) at 1 m) for indoor use (high sound pressure drives away perpetrators)
Compact, simple design fits into any room situation
Simple, wireless integration into the Secoris intrusion alarm control panel via the wireless extension (BUMO60030)
Confirmation tones for arming/disarming, input and output delay and error messages
Wireless siren easy to install or retrofit without cables (battery operation up to 2 years)
Flexible choice of installation location thanks to long wireless range (can be extended via repeater)
Can be used in Secoris wireless mode and via Secvest wireless
Battery operation or with external power supply (optional power supply unit available)
EN Grade 2 certified

Downloads

General downloads:

Certificates:

VSÖ Certificate

Declarations of conformity:

declaration of conformity

Recycling

We have summarised for you which disposal information is important in your country.

Disposal & labelling of packaging

Specifications

Battery - GRS type:	Alkaline
Battery - max. battery life:	2 y
Battery - quantity:	4
Battery - type:	1.5 V AA Alkaline
Certifications:	EN 50131 Grade 2, VSÖ GS N
Compatible with:	Secoris, Secvest
Connections:	Voltage
DC voltage supply:	12 V
Dimensions:	(WxHxD) 130x154x40 mm
EN:	Grade 2
Environmental class:	II
Gross weight:	0,31 kg
Height:	154 mm
Housing material:	PC / ABS
IP protection class:	34
Installation location:	Surface Mount
Length:	40 mm
Max. humidity:	95 %
Max. operating temperature:	55 °C

Max. receiving range (building):	30 m
Max. receiving range (free field):	700 m
Max. transmission range (free field):	700 m
Min. operating temperature:	-10 °C
Modulation:	2FSK
Net weight:	0,218 kg
Power consumption:	93 mA
Radio frequency:	868,09 MHz
Radio frequency 2:	868,23 MHz
Radio frequency 3:	868,37 MHz
Radio frequency 4:	868,51 MHz
Radio frequency 5:	868,6625 MHz
Radio power:	10 mW
Sabotage monitoring:	Yes
Sound pressure:	> 80 dB
Standby power consumption:	0,003 mA
Voltage monitoring:	Yes
Width:	130 mm

Matching