Recently searched

    Smoke Alarm Detector
    Smoke Alarm Detector
    Smoke Alarm Detector
    New

    Optical Smoke Detector 12 V

    Description

    The 12 V optical smoke detector reacts to visible smoke particles. If too much smoke enters its measuring chamber, an alarm is triggered. In the measuring chamber, an integrated infrared light source generates a light pulse every 8 seconds. Smoke particles from a fire change the light signal received by the light diode. A relay trips and the alarm center reports a fire alarm. The 12 V optical smoke detector is mounted on the ceiling in the center of the room. The minimum distance to the side wall should be 30cm. We recommend a separate smoke detector for each entrance area, staircase, living-room, and bedroom. By changing a jumper, you can configure the optical smoke detector as NO or as NC detector. It is therefore suitable for every wired alarm system. The smoke detector is supplied externally with 12V operating voltage and is EN54 certified.

    Smoke Alarm Detector

    Product advantages

    • Suitable for connecting to alarm and fire detection systems
    • Detects visible smoke particles
    • Self-adjusting
    • Potential-free alarm relay

    Downloads

    General downloads:

    Declarations of conformity:

    Certificates:

    Recycling

    We have summarised for you which disposal information is important in your country.

    Disposal & labelling of packaging

    Smoke Alarm Detector
    Smoke Alarm Detector
    Specifications
    Areas of application: Interior
    Certifications: EN 54-7
    Colour: white
    Compatible with: Secoris, Secvest, Terxon
    Connections: Screw terminal NO or NC, 2A at 30V DC
    Current consumption: 48 mA
    DC power supply: 10-28 V
    Detection method: Optical
    Diameter: 100 mm
    Dimensions: (HxD) 45x100 mm
    Height: 45 mm
    Housing material: ABS
    Length: 100 mm
    Max. Air humidity: 95 %
    Max. Operating temperature: 50 °C
    Mechanical protection: No
    Min. humidity: 0
    Min. operating temperature: -10 °C
    Mounting location: Ceiling
    Net weight: 0.136 kg
    Product group: Detectors
    Radio networked: No
    Sensor type: Photodiode
    Standalone: No
    Status display: Yes
    Type of protection: Fire protection
    VdS class: without
    VdS recognized: No
    Voltage monitoring: No
    WEEE group: 09
    width: 100 mm
    Loading ...