Secoris wireless repeater (signal amplifier)

Optimum wireless signal: the wireless repeater increases the range of all Secoris wireless components for wireless extension. And it also amplifies the signal even where the building structure has a shielding effect.

Description

FUMO60010

TRANSMITS STRONG WIRELESS SIGNALS

The Secoris wireless repeater is an optional additional module for the hybrid-capable Secoris intrusion alarm system. It is used if the range of one or more wireless components is not sufficient to bridge the distance to the Secoris wireless extension or if other factors (e.g. building fabric) impair the wireless signal.

Optimum wireless range throughout the building

The wireless repeater extends the range of all Secoris wireless components to the Secoris wireless extension. Up to 10 wireless components can be integrated per repeater, 2 repeaters per wireless extension, thus max. 20 wireless components per Secoris alarm system.

Convenient configuration, simple installation

The wireless components to be amplified are selected manually in the wireless extension menu and then automatically transmitted to the repeater. The wireless repeater is supplied with power via a 12 V power supply unit and is backed up by an emergency power supply in the event of a power failure.

Extension module for the Secoris intrusion alarm system

The wireless repeater is wirelessly taught into the Secoris intrusion alarm control panel via the BUS wireless extension BUMO60030. It supports the secure Secoris wireless protocol, so transmission is AES128-encrypted (same security level as in online banking) and protected against so-called replay attacks.

Product advantages

Additional module to increase the range and amplify the signal of Secoris wireless components
Enables good wireless accessibility anywhere in the building
Opens up rooms, parts of buildings and outdoor areas for wireless components that would otherwise not be suitable for wireless operation due to long distance to the Secoris wireless extension or the shielding building structure
Amplifies the signal for max. 10 Secoris wireless components, e.g. motion detector, smoke alarm or wireless outdoor siren
Low-maintenance operation with external power supply, with integrated emergency power supply via battery
EN Grade 2 certified

Downloads

General downloads:

Certificates:

VSÖ Certificate (26.06.2023)

Declarations of conformity:

CE Declaration of Comformity (2023.06.01)

Recycling

We have summarised for you which disposal information is important in your country.

Disposal & labelling of packaging

Specifications

Battery - GRS type:	Alkaline
Battery - quantity:	2
Battery type:	1,5V AA Alkaline
Certifications:	EN 50131 Grade 2, VSÖ GS N
Compatible with:	Secvest, Secoris
Connections:	Voltage
Current consumption:	50 mA
DC power supply:	12 V
Dimensions:	(WxHxD) 130x155x42 mm
Display type:	3 LED
Emergency power supply:	Yes
Environmental class:	II
Height:	155 mm
Housing material:	ABS
Inputs:	power supply, USB
Integrated siren:	No
Language Manual:	DE,EN,FR,NL,DK,IT
Language OSD:	DE,EN,FR,NL,DK,IT
Length:	42 mm
Max. Air humidity:	94 %
Max. Emergency power runtime:	25 h
Max. Operating temperature:	55 °C
Max. Receive range (building):	30 m
Max. Receive range (free field):	500 m

Max. Transmit range (free field):	500 m
Max. Transmitting range (building):	30 m
Mechanical protection:	No
Min. operating temperature:	-10 °C
Modulation:	FM
Mounting location:	Surface Mounting
Net weight:	0.274 kg
Network connection LAN:	No
Operating mode:	via Control Panel
Protection class IP:	34
Radio alarm bandwidth:	20 kHz
Radio frequency:	868.6625 MHz
Radio power:	10 mW
Security gradient:	2
Security level:	Yes
Software version:	1.3.2
Tamper monitoring:	Yes
Transmission path:	Wireless
Type of inputs:	Voltage
VdS class:	without
Voltage monitoring:	Yes
WEEE group:	09
width:	130 mm

Required accessories

Matching