Recently searched

    Secoris 10" Touch control panel
    Secoris 10" Touch control panel
    Secoris 10" Touch control panel

    Secoris 10" Touch control panel

    Arm or disarm the Secoris intruder alarm system or view the status of all windows and doors. Simple and intuitive touch display.

    Description



    The touch control panel has two operating modes: standard operating mode and detector zone display, each protected by a PIN code. The desired mode is set during installation.

    Simply convenient: operate the Secoris by touch
    In the operating mode, you control, arm (activate) and disarm (deactivate) the Secoris intruder alarm system with the same intuitive ease as in the Secoris app.

    Status at a glance
    In the detector zone display, all sub-zones and the opening detectors located in them are displayed together with their status (open/closed). In this way, the user is reliably able to see open doors and windows before arming the system. It can be set as a permanent display.

    Discreet wall terminal
    The touch control panel has a touchscreen with a 10.2 inch (approx. 26 cm) screen and the standard dimensions of a tablet PC. This makes it a flexible fit for any hallway or entrance area.

    Easy to install
    The touch control panel is integrated into the Secoris control panel via IP network (LAN, Wi-Fi) and supplied with power via the network (PoE), from a flush-mounted socket or with a plug-in power supply unit (suitable ABUS accessories: Powerline PoE adapter, mini built-in power supply unit or plug-in power supply unit). In this way, the control panels/terminals can be flexibly distributed throughout the building.

    Product advantages

    • Tablet control panel with 10.2 inch (approx. 26 cm) touch display for easy operation of the Secoris intruder alarm system without buttons
    • Two operating modes can be set: standard operating mode or detector zone display
    • Operating mode for conveniently arming and disarming (activating, deactivating) the intruder alarm system
    • Can switch partitions, e.g. individual departments separately
    • See status at a glance: the detector zone display shows the status open/closed for all access points (secured doors and windows) in all sub-zones
    • Can be used flexibly anywhere in the building, with stable connection to the Secoris control panel, optionally via network cable (LAN) or Wi-Fi
    • Quick, easy installation: Power supply via network cable/PoE (LAN operation) or power supply unit (Wi-Fi operation)
    • Wall terminal for easy installation in the hallway or entrance area (wall mount included)
    • In combination with Secoris KNX Package (ESMO60020) only possible in app mode

    Downloads

    General downloads:

    Declarations of conformity:

    Software:
    Firmware:

    Recycling

    We have summarised for you which disposal information is important in your country.

    Disposal & labelling of packaging

    Secoris 10" Touch control panel
    Secoris 10" Touch control panel
    Specifications
    Colour: White
    Compatible with: Secoris
    Connections: RJ45 Ethernet, supply voltage
    DC voltage supply: 12 V
    Dimensions: 254 x 166 x 26,6 mm
    Display: 10.1 inch Capacitive Touch-Screen
    Environmental class: II
    Fuse protection type: Intrusion protection
    Gross weight: 1,06 kg
    Height: 166 mm
    Housing material: ABS
    Installation location: Wall
    Max. humidity: 90 %
    Max. operating temperature: 50 °C
    Min. operating temperature: -10 °C
    Net weight: 0,875 kg
    PSTI conformity required: No
    Power consumption: 96 mA
    Sabotage monitoring: No
    Width: 254 mm
    Matching
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
    Loading ...