Secoris BUS keypad with RFID reader (Mifare Desfire)

Operate, arm and disarm the Secoris intrusion alarm system: simply by RFID chip key or by entering the PIN code on the keypad.

Description

BUBE60020

OPERATE THE ALARM SYSTEM FLEXIBLY & SECURELY.

The BUS keypad is the main component for operating and configuring the Secoris intrusion alarm system.

Operate the alarm system simply and securely.

The BUS keypad is used to operate, arm (activate) and disarm (deactivate) the Secoris intrusion alarm system: by chip key or PIN code entry on the keypad. An outdoor keypad reader can be connected for operation from outside. If a door locking element is also installed, the building cannot be entered unintentionally when the system is armed (forced entry).

Easy installation in the entrance area

The keypad is wired and supplied with power via the BUS line of the intrusion alarm control panel. This means that the keypads can be flexibly installed in different parts of the building, for example, floor by floor.

Backlit buttons and LED status display

The brightness of the keypad backlighting is adjustable and can the backlighting can also be switched off. The system status can be easily read off on the coloured LED display.

High security standards & certification

With the corresponding transponders (Mifare Desfire EV1 or optionally Mifare Classic), RFID transmission is readout-protected. An outdoor keypad reader can be connected via a highly secure OSDP connection. The keypad is certified according to EN Grade 3 and SES (EN-CH) Grade 3.

Product advantages

Keypad with RFID reader / proximity reader (Mifare-Desfire) for indoor use
For convenient operation (arming/disarming) of the control panel by means of a contactless RFID transponder (chip key) or PIN code when leaving/entering the building
Readout-protected RFID communication between transponder and keypad with high security standard (Mifare Desfire EV1) possible - Mifare Classic also supported
Switching of sub-areas possible, e.g. individual departments separately
Keypad with backlight and individually adjustable brightness
Coloured LEDs to indicate the current system status (armed, disarmed, alarm, malfunction)
Connection for external keypad reader for easy arming/disarming from outside, connected via RS485 line, with high OSDP security standard (secured connection, AES128-encrypted)
Fast, flexible installation: Power supply via the BUS line of the Secoris control panel or external power supply unit possible
Up to 50 BUS components (incl. keypads) per system are possible
EN 50131 Grade 3 SES (EN-CH) Grade 3 certified

Downloads

General downloads:

Declarations of conformity:

CE Declaration of Comformity

Recycling

We have summarised for you which disposal information is important in your country.

Disposal & labelling of packaging

Specifications

Certifications:	EN 50131 Grade 3, SES (EN-CH) 2/3
Colour:	white
Connections:	RS485 BUS, Screw terminal for additional Tamper contact
Current consumption:	65 mA
DC power supply:	12 V
Depth:	29 mm
Dimensions:	(WxHxD) 128x128x29 mm
EN:	Level 3
Environmental class:	II
Height:	128 mm
Housing:	ABS
Housing material:	ABS
Integrated siren:	Yes
Length:	29 mm
Max. Air humidity:	75 %

Max. Operating temperature:	55 °C
Min. operating temperature:	-10 °C
Mounting location:	surface mount
Net weight:	0.222 kg
Number of rooms / groups:	20
Outputs:	1 transistroised output
Product group:	Operation
Reader type:	Mifare DESfire EV1/EV2, Mifare Classic (optional)
Switching outputs:	1 Open Collector Output
Tamper monitoring:	Yes
VdS class:	without
WEEE group:	09
Zone closure:	FSL/CC
width:	128 mm

Required accessories

Matching