- Wireless networking in single zone: up to 15 networkable smoke and heat alarms can form a wireless zone – so all networked alarms issue an alert in the event of danger
- Networked wireless zones (multiple zone): up to 15 single wireless zones can be combined to form a multiple zone – for example, to link alarms in the individual flats with the wireless zone in the stairwell
- Flat design: thanks to its particularly flat design with a height of just 2,85 cm, the alarm blends unobtrusively into any room
- Smoke alarm function: the alarm detects visible smoke particles in the air and triggers a loud alarm in the event of danger – for an early warning in the event of fires
- Improved smoke chamber technology: automatic contamination compensation and two infrared LEDs in the smoke chamber enable more precise smoke detection and effectively reduce false alarms caused by dust and other particles
- Insect screen: a fine-meshed screen that prevents false alarms caused by insects and other small animals entering the smoke chamber
- Translucent LED: for a pleasant lighting effect, the status LED is located under the housing of the alarm – for a harmonious look without glaring points of light
- Suitable for bedrooms thanks to adaptive LED brightness: a sensor in the detector recognises when the ambient light gets darker and dims the light intensity of the status LED – for undisturbed falling asleep and sleeping through the night
- Large-area test button: almost the entire underside of the alarm serves as a button and can be reached quickly for a function test – with a broom handle or rod, for example
- Mute: the alarm tone can be temporarily switched off by pressing the test button – the alarm remains active and issues an alarm again after 10 minutes if smoke is still detected
- Battery: the alarm is equipped with a permanently installed CR123A battery with a service life of up to 10 years – smoke and heat alarms should be replaced after 10 years of use
- Automatic self-test: silently checks the battery and sensors every 8 seconds
- Acoustic and visual alarm: in the event of danger, the alarm issues a clearly audible warning with a loud alarm tone and by flashing the status LED
- Simple adhesive mounting without drilling: the alarm can be quickly and securely mounted on the ceiling thanks to the adhesive pad already attached – alternatively with the enclosed screws and dowels
- Integrated magnetic holder: the detector can be easily attached to the mounting plate thanks to the built-in magnet
- Tested and certified: the alarm fulfils the increased Q mark standards applicable from 2026 and the European standard EN 14604:2005/AC:2008 – certified by the KRIWAN test centre
New
PREFIRA™ CONNECT smoke detector
So that everyone is warned in good time: the PREFIRA CONNECT wireless smoke alarm can be connected to 14 other smoke and heat alarms. Easy to install using an adhesive pad, discreet design, Q mark-certified quality.
Awards & Partners
Q-Label
Technologies
Operation and use
- Suitable for bedrooms and living areas (particularly suitable for bedrooms): thanks to adaptive LED brightness, ideal alarm for bedrooms and children's rooms; also the perfect choice for use in living rooms and hallways
- Suitable for motorhomes, campers and vans: the smoke alarm is used for early smoke detection in sleeping and living areas
Downloads
General downloads:
Recycling
We have summarised for you which disposal information is important in your country.
Specifications
