- Heat alarm function: the alarm reacts when a critical heat limit (54–65 °C) is reached – ideal for kitchens, garages and other rooms exposed to steam or smoke
- Wireless networking in single zone: up to 15 networkable smoke and heat alarms can form a wireless zone – so all networked alarms issue an alert in the event of danger
- Networked wireless zones (multiple zone): up to 15 single wireless zones can be combined to form a multiple zone – for example, to link alarms in the individual flats with the wireless zone in the stairwell
- Battery: the alarm is equipped with a permanently installed CR123A battery with a service life of up to 10 years – smoke and heat alarms should be replaced after 10 years of use
- Acoustic and visual alarm: in the event of danger, the alarm issues a clearly audible warning with a loud alarm tone and by flashing the status LED
- Translucent LED: for a pleasant lighting effect, the status LED is located under the housing of the alarm – for a harmonious look without glaring points of light
- Mute: the alarm tone can be temporarily switched off by pressing the test button – the alarm remains active and issues an alarm tone again after 10 minutes if there is still a critical temperature
- Large-area test button: almost the entire underside of the alarm serves as a button and can be reached quickly for a function test – with a broom handle or rod, for example
- Automatic self-test: silently checks the battery and sensors every 8 seconds
- Simple adhesive mounting without drilling: the alarm can be quickly and securely mounted on the ceiling thanks to the adhesive pad already attached – alternatively with the enclosed screws and dowels
- Integrated magnetic holder: the detector can be easily attached to the mounting plate thanks to the built-in magnet
- Tested and certified to BS 5446-2: the alarm fulfils the requirements of the British standard for heat alarms – certified by the British Standards Institution (BSI)
- Kitemark-certified: tested and regularly monitored by the British Standards Institution (BSI)
New
PREVARO™ CONNECT
The PREVARO CONNECT is a wirelessly networkable heat alarm that can also be connected to PREFIRA CONNECT smoke alarms: for all-round fire safety from the bedroom through to the kitchen and garage.
Awards & Partners
Kitemark-Zertifizierung
Technologies
Operation and use
- Suitable for kitchens and bathrooms: the kitchen-safe detector reacts to heat – no false alarms due to steam or cooking vapours thanks to the heat alarm function instead of smoke detection
- Suitable for garages and cellars: the alarm reacts to heat – false alarms caused by smoke, vapour, dust and exhaust fumes are avoided thanks to the heat alarm function; practical in the laundry room, for example, where washing machines and dryers are potential sources of fire
- Suitable for motorhomes, campers and vans: the heat alarm provides an early warning in the cooking area
Downloads
General downloads:
Recycling
We have summarised for you which disposal information is important in your country.
Specifications
