Secoris Wireless Magnetic Contact (white)

Secoris Slim wireless opening detector (white)

Alerts reliably in the event of a break-in: the slim wireless magnetic contact detects and reports the unauthorised opening of doors and windows. It uses a magnetic field measurement for this.

Description

FUMK60030W MONITORS WINDOWS AND DOORS

Reliably issues an alarm for every break-in
The slim wireless opening detector monitors the most important access points for intruders. It detects and reports the unauthorised opening of windows and doors, including forced entry. To do this, it uses a precise magnetic field measurement. If a break-in is detected, it reports this directly to the alarm control panel of the Secoris intrusion alarm system or Secvest wireless alarm system, which immediately triggers the alarm.

Looks good. Fits in tight places
With its slim design, the wireless magnetic contact has an attractive appearance and is suitable for particularly tight installation conditions. It consists of the detector unit (reed contact) and a separate magnet. The detector and magnet are mounted parallel to each other on the window wing/door panel and on the frame. If the window or door is opened, the distance between the two contact points increases and the detector triggers.

Long wireless range and security
The wireless opening detector has a long range and is taught into the Secoris intrusion alarm system wirelessly via the wireless extension BUMO60030. A secure wireless protocol protects the connection from tampering by third parties. Transmission is AES128-encrypted (same security level as in online banking) and protected against so-called replay attacks. The detector requires very little maintenance thanks to a battery life of up to 3 years.

Colour variants for every room design
The detector is available in white and anthracite.

Awards & Partners

Product advantages

Opening detector reliably detects the opening of windows and doors (magnetic contact)
Slim design and discreet appearance, particularly suitable for tight installation spaces
Easy to retrofit without cable (battery life up to 3 years)
Tamper monitoring (cover and wall tear-off contact)
Opening detector can be used in Secoris wireless mode (BUMO60030) or Secvest wireless mode (FUAA50000, FUAA50500)
Wireless connection in Secoris wireless mode AES128-encrypted and replay-protected
Finish: available in anthracite (FUMK60030A) and white (FUMK60030W)
High security, reliability & wireless range: EN Grade 2 certified

Downloads

General downloads:

Certificates:

VSÖ Certificate

Declarations of conformity:

declaration of conformity

Recycling

We have summarised for you which disposal information is important in your country.

Disposal & labelling of packaging

Specifications

Battery - fixed:	No
Battery - max. battery life:	3 y
Battery - quantity:	1
Battery - type:	CR2 3V Li/MnO2
Certifications:	EN 50131 Grade 2, VSÖ GS N
Colour:	white
Colour options:	white, brown
Compatible with:	Secoris, Secvest
DC voltage supply:	3 V
Dimensions:	(WxHxD) 19x103x24 mm
EAN:	4.043.158.191.424
EN:	Level 2
Environmental class:	II
Gross weight:	0,05 kg
Height:	103 mm
Housing material:	ABS
IP protection class:	34
Installation location:	Windows, doors
Language of instructions:	DE, EN, FR, NL, DK, IT
Language packing:	DE, EN, FR, NL, DK, IT
Length:	24 mm
Max. humidity:	95 %
Max. operating temperature:	55 °C
Max. receiving range (building):	30 m

Max. receiving range (free field):	700 m
Max. transmission range (building):	30 m
Max. transmission range (free field):	700 m
Mechanical protection:	No
Min. operating temperature:	-10 °C
Modulation:	2FSK
Net weight:	0,045 kg
Power consumption:	25 mA
Radio frequency:	868,09 MHz
Radio frequency 2:	868,23 MHz
Radio frequency 3:	868,37 MHz
Radio frequency 4:	868,51 MHz
Radio frequency 5:	868,6625 MHz
Radio power:	10 mW
Sabotage monitoring:	Yes
Security level:	2
Sensor type:	Solid State (MEMS)
Standby power consumption:	0,003 mA
Status display:	Yes
Type of detection:	Magnetic field measurement
VdS class:	none
Voltage monitoring:	Yes
Width:	19 mm