Secoris wireless Seismic sensor

The wireless vibration detector monitors surfaces (e.g. wall) or objects (e.g. display case). It reacts to vibrations that occur during break-in attempts (e.g. breaking through a wall).

Description

FUEM60000 VIBRATION DETECTOR FOR SURFACES AND OBJECTS

Detects the vibration of break-in and break-through attempts

The wireless vibration detector reacts to vibrations caused by break-in attempts, breaking open and breaking through walls, doors, etc. (smashing, drilling, sawing, levering, etc.) and to the movement of objects (theft). The occurring vibrations are reliably detected and reported to the intrusion alarm system or alarm system.

For valuable objects, structural elements, protective walls, etc.
The wireless vibration detector detects vibrations of the surface on which it is mounted. It is attached to the objects that are not to be moved or penetrated, e.g. safes, display cases, works of art. It also monitors wooden doors, glass walls, plaster walls or window frames against breaking through and breaking open. The detector's highly sensitive acceleration sensor can be precisely adjusted via variable sensitivity and alarm levels (e.g. alarm at the first vibration, after repeated vibration). This ensures a high level of protection against false alarms (e.g. vibrations caused by truck traffic).

Secure connection, long range
The detector is taught into the Secoris wirelessly via the BUS wireless extension. A secure wireless protocol protects the connection from tampering by third parties. Transmission is AES128-encrypted (same security level as in online banking) and protected against so-called replay attacks. The detector offers a long wireless range.

Product advantages

Wireless vibration detector for monitoring objects and walls that are not to be moved or penetrated
Detector monitors the surface or object on which it is mounted for vibration (highly sensitive acceleration sensor)
Sensitivity and alarm sensitivity individually adjustable
Wireless detector easily retrofittable without cable (battery life up to 2 years)
Display of the wireless signal strength on the unit (coloured LED)
High security: tamper monitoring (cover and wall tear-off contact)
Vibration detector can be used in Secoris wireless mode (BUMO60030) or Secvest wireless mode (FUAA50000, FUAA50500)
Wireless connection in Secoris wireless mode AES128-encrypted and replay-protected
Compliant with EN 50131

Downloads

General downloads:

Recycling

We have summarised for you which disposal information is important in your country.

Disposal & labelling of packaging

Specifications

Adjustable sensitivity:	Yes
Alarm memory:	No
Battery - fixed:	No
Battery - max. battery life:	2 y
Battery - quantity:	1
Battery - type:	CR2, 3V
Certifications:	compliant to EN 50131-1
Colour:	white
Compatible with:	Secoris, Secvest
DC voltage supply:	3 V
Diameter:	19 mm
Dimensions:	(WxHxD) 19 x 103 x 24 mm
EN:	Grade 2
Environmental class:	II
Gross weight:	0,04 kg
Height:	103 mm
Housing material:	ABS
Installation location:	Surfaces to be monitored for shock
Max. humidity:	95 %
Max. operating temperature:	55 °C
Max. receiving range (free field):	700 m

Max. transmission range (free field):	700 m
Min. operating temperature:	-10 °C
Modulation:	2FSK
Net weight:	0,035 kg
Power consumption:	25 mA
Radio frequency:	868,09 MHz
Radio frequency 2:	868,23 MHz
Radio frequency 3:	868,37 MHz
Radio frequency 4:	868,51 MHz
Radio frequency 5:	868,6625 MHz
Radio power:	10 mW
Sabotage monitoring:	Yes
Security level:	2
Sensor type:	Acceleration Sensor
Standby power consumption:	0,02 mA
Status display:	Yes
Type of detection:	Vibration detection
VdS class:	without
Voltage monitoring:	Yes
Width:	19 mm