Secoris wireless glass break alarm (acoustic)

The wireless glass break alarm detects the sound of breaking glass and reports the glass breakage to the Secoris intrusion alarm system or Secvest alarm system.

Description

FUGB60000 DETECTS GLASS BREAKAGE BY THE SOUND

Simply efficient
The acoustic wireless glass break alarm detects the sound of breaking glass panes (windows, glass doors) and reports the glass breakage to the Secoris intrusion alarm system or Secvest alarm system. The acoustic sensor monitors almost the entire room.

2-stage detection: false alarm as good as impossible
The sensor detects the typical sound components of breaking glass (low and high frequencies) in two stages: first the sound of the actual glass breaking, then the sound of the shards hitting the floor. An alarm is issued only if both criteria are fulfilled. This minimises the risk of false alarms.

Optimum mounting, reliable room monitoring
The detector should be aimed directly at the window surface to be monitored (distance to the glass front 2 to max. 9 m).Technical notes: Interference noises in the immediate vicinity and the window environment (curtains, flowers, intruder-resistant glass, etc.) can reduce the detection range. Acoustic alarms are not recommended for rooms with carpeted floors (carpet can dampen the impact sound of the shards).

Secure wireless connection
The wireless glass break alarm has a long range. It is taught into the Secoris control panel via the BUS wireless extension (BUMO60030). The highly encrypted connection is protected against tampering and so-called replay attacks by a secure wireless protocol.

Product advantages

Acoustic glass break alarm: detects the specific sound of glass breaking
Monitors a window or a window front in the room (without being placed directly on the pane)
Wireless detector easily retrofittable without cable (battery life up to 2 years)
Display of the wireless signal strength on the unit (coloured LED)
High security: tamper monitoring (cover and wall tear-off contact)
Glass break alarm can be used in Secoris wireless mode (BUMO60030) or Secvest wireless mode (FUAA50000, FUAA50500)
Wireless connection in Secoris wireless mode AES128-encrypted and replay-protected
Compliant with EN 50131

Downloads

General downloads:

Declarations of conformity:

CE Declaration of Comformity (2023.06.01)

Recycling

We have summarised for you which disposal information is important in your country.

Disposal & labelling of packaging

Specifications

Battery - max. battery life:	2 years(s)
Battery - permanently installed:	No
Battery type:	3V DC lithium CR2 battery
Certifications:	compliant to EN 50131-1
Colour:	white
Compatible with:	Secoris, Secvest
Current consumption:	24 mA
Current consumption standby:	0.021 mA
DC power supply:	3 V
Detection area detector (m):	6 m
Detection method:	Audible
Dimensions:	(WxHxD) 108x80x43 mm
Environmental class:	II
Height:	80 mm
Housing material:	ABS
Length:	43 mm
Max. Air humidity:	85 %
Max. Operating temperature:	55 °C
Max. Receive range (building):	30 m
Max. Receive range (free field):	700 m
Max. Transmit range (free field):	700 m
Max. Transmitting range (building):	30 m
Mechanical protection:	No

Min. operating temperature:	-10 °C
Modulation:	2FSK
Mounting location:	Across from the glass surfaces to be monitored
Net weight:	0.14 kg
Product group:	Detectors
Radio frequency:	868.09 MHz
Radio frequency 2:	868.23 MHz
Radio frequency 3:	868.37 MHz
Radio frequency 4:	868.51 MHz
Radio frequency 5:	868,6625 MHz
Radio power:	10 mW
Security gradient:	2
Sensor type:	Microphone sensor technology
Status display:	Yes
Tamper monitoring:	Yes
Technology:	Electronics
Type of protection:	Intrusion protection
VdS class:	other
Voltage monitoring:	Yes
WEEE group:	09
width:	108 mm