ABUS Wired Indoor Siren

Description

AZSG10020

The inside siren is installed inside your building. It is the last and critical module of a complete alarm chain. The inside siren is an acoustic signal generator. You have a choice between two alarm modes in this case. Both signals are felt to be extremely loud due to the high acoustic pressure and the signal frequency. The remotely activated LED of the alarm siren can be used to detect the status of the alarm panel (armed/disarmed). The rugged plastic housing of the acoustic signal generator is protected against sabotage by a wall and cover contact. The inside siren is powered with 12 V.

For safe and proper operation, this device must be installed and regularly maintained by a professional trained by us. Arrange regular maintenance appointments with your installer to ensure trouble-free operation in the long term with the latest security updates and new functions.

Product advantages

LED to display armed/disarmed status
Simple, inconspicuous design
Simple installation
90 dB(A) sound pressure @ 1m
Tamper detection for front and rear sides
Shock-resistant construction from polycarbonate

Downloads

General downloads:

Declarations of conformity:

Additional information:

Wiring Diagram

Recycling

We have summarised for you which disposal information is important in your country.

Disposal & labelling of packaging

Specifications

Compatible with:	Secoris, Secvest, Terxon
DC voltage supply:	12 V
Dimensions:	(WxHxD) 115x138x36 mm
Environmental class:	II
Gross weight:	0,212 kg
Height:	41 mm
Housing material:	POLYCARBONAT (PC)
Installation location:	Indoors, Wall
Length:	145 mm
Light source:	LED

Max. humidity:	95 %
Max. operating temperature:	40 °C
Min. operating temperature:	-15 °C
Net weight:	0,174 kg
PSTI conformity required:	No
Power consumption:	100 mA
Sabotage monitoring:	Yes
Sound pressure:	90 dB
Width:	119 mm